© 2023 by AAP. Proudly created by ArkPC ~ Kaomech

21 Margaret Street, Southport

Queensland, 4215

Your 1 Stop Auto Shop

Come visit us!

  • Grey Facebook Icon
  • Grey Twitter Icon
  • Grey Google+ Icon
  • Grey YouTube Icon

BRAKE REPAIRS - SOUTHPORT, GOLD COAST

Brakes are a critical safety system of a vehicle. The brake system should be checked at every service and should not be interfered with / tampered, by anybody who does not have the appropriate skills,
experience and qualifications,
also the latest electronic diagnostic and service equipment will be needed

 

A typical brake service would include:

  • Check disc brake and or drum shoe wear levels

  • Replace front and rear pads/shoes if necessary

  • Inspect brake fluid levels and check braking system components

Road test vehicle to check that brakes are operating correctly

Frequently Asked Questions
1. How long should my brakes last?

Depending on the vehicle application and driving conditions, brake pads should last anything from 15,000 to 70,000 kilometres. If you feel that your brake pads are wearing out prematurely you may need to install heavier duty, temperature resistant brake pads such as Bendix Heavy Duty or QFM Ceramics. The main cause of premature wear is high temperatures caused by driving on steep terrain, towing heavy loads and constant braking. All these factors increase braking temperatures and reduce the life of brake pads.

2. Why are my brakes noisy?
Brakes should operate with a minimal amount of noise, however some noise is normal, but excessive squeal, screech, grinding, groaning or banging means that your brakes need attention. There are many varying factors that can contribute to noise including vehicle application and driving style.
3. When should brakes be machined?
All Automotive Parts recommends that rotors be machined as a routine part of every brake job.Rotor thickness variation and surface irregularities can lead to brake noise and vibration. Some rotors cannot be satisfactory machined and replacement may be necessary. We always measure the thickness prior to commencing machining.

4. There’s a terrible vibration when I brake. What causes that?
If the brake pedal, steering wheel or the entire vehicle shakes, vibrates or pulsates when the brakes are applied, then the disc brake rotors may need resurfacing. More serious problems such as a loose component or a faulty steering mechanism can also cause vibration.

5. Which brake pads should I use for my car?
The key to selecting the right brake pad for your car and to achieving efficient braking is matching your driving style and vehicle type with the right brake pad formulation. Cost may also be a factor & realistically If you are driving just up the road and back and nothing more then the latest race tech pad is not going to be suitable.

Car Brakes Hyunai & Kia Vehicle Service